Description
The Cable Locator consists of a transmitter and a receiver. The
transmitter sends a digitally coded line number which is selectively
received and displayed as a digit by the receiver. A field strength
indicator and a button-controlled sensitivity fine adjustment enable
easy location to the transmitter signal. Using several transmitters with
different line numbers a contact-free sorting of up to 16 lines is possible.
The transmitter signal strength is pre-adjustable by means of the >> low
<< and >> high << switch.
Typical applications are e.g. locating line interruptions in cables,
locating lines in wall, locating short-circuits in lines, locating bottlenecks
(obstructions) in installation pipes, sorting of up to 16 lines (several
transmitters required). The working range depends on the surrounding
medium (water, earth, humid walls, or other shieldings) and varies
between 0 cm to approx. 40 cm, depending on type of application.
Features
For all applications (live or dead cables) without additional instruments.
Safe locating via display of a specified letter on the receiver.
Simultaneous sorting of up to 16 lines (more than one transmitter required)
Transmitter is voltage-proof up to 250 Volts AC/ DC.
Specification
Display
: LED row for intensity and 7 segment display for number and letter to display transmitter code
Max. Voltage
: 250 Volts
Tracing Depth
: 0…40 cm
Power Supply
: Transmitter: 2 x 9 V, IEC 6LR61 Receiver: 1 x 9 V IEC 6LR61
Dimensions
: 380 x 305 x 90 mm (case)
Weight
: approx. 1.8 kg
Applications
This instrument is ideal for complete tracing and fault detection of cables installed in buildings
Locating cable interruptions
Tracing cables in walls and floors (floor heating)
Locating short circuits in cables or lines
Locating and assigning fuses
Tracing water and heating pipes in walls and floors
Assigning of complete house network (electrical connection, water and gas pipes), e.g. old building reconstruction.
