 |
|
|
|
|
||||||||||||||||||||||||||||||||||||||
| Type : 7001 BNC / TNC (With PC Interface and Measurement Software) |
BNC = With Binocular Head
TNC = With
Trinocular Head
|
Description Vaiseshika introduces the most sophisticated Metallurgical Microscope Type 7001. This microscope has been designed to conduct microstructure examination of metallographic specimen. Optical detection of surface irregularities/ inclusions and faults in metals can also be observed with this microscope. This instrument has superb capability to reveal significant specimen details with outstanding relief in black and white or brilliant colours. |
 |
| The metallurgical experts will find this microscope a versatile equipment for testing non-destructive materials, ceramics, textiles, petrochemicals, avionics, defence, research and development establishments will find this microscope excellent for optical observation of a wide range. Above all the additional camera attachment for microphotography makes this microscope an excellent quality control equipment for the engineering industry. | |
Features
| Incident light microscopy for metallography. |
| Magnification range 25x to 2500x. |
| Spring loaded objectives at higher magnification to avoid damage to optics or specimen. |
| Coarse and fine focusing with 5 micron resolution. |
| Perfect transmission system having localized illumination and flatness of field. |
| Halogen light for microphotography. |
| Add-on accessory type camera for micro-photography. |
| CCTV camera attachment optional |
Specification
| Magnification | : 25x to 2500x (with optional accessories) |
| Focusing | : Coarse and Fine |
| Head | : Monocular, Binocular/ Trinocular (optional) |
| Illumination | : Halogen, incident light. Facility to control intensity of light and field aperture |
| Eye-pieces | : 5x, 10x |
| Objectives | : 10x & 45x |
| Micro Photographic images captured on Metallurgical Microscope | |
 |
 |
Micro structure of polishing powder of 1/100 micron |
Micro structure of welding joint |
 |
 |
Diamond particles on cutting wheel |
Electric wire for arching after treatment |
| Type : UMS - 300 (With PC Interface and Measurement Software) |
| Description UMS-300 reflected metallurgical microscopes are suitable to observe the microscopically surfaces of non-transparent objeccts. They are equipped with large moving ramgre mechanical stages, reflected vertical illumination and set polarizer device in trinocular. they have clear and high contrast picture sculpt, conventional control etc. |
 |
| They are suitable for scientific research, teaching , demonstration in the colleges and factories. | |
Features
| With long working distance, plan achrobatic objectives (no cover glass) and wide field eye-piece, can get clear pictures and wide view field. |
| with large move range mechanical stage, can move quikly and slowly |
| Coaxial coarse / fine focus system with tensional adjustable and up stop, minimum division of fine focussing of 0.7 micro meters. |
| 6V/ 20W halogen bulb adjustable brightness |
| Trinocular can switch to observe normally or to observe polarize. Can send 100% of light to the binocular eye-piece or to the top port. |
Specification
| Eye-piece | Wide Filed WF 10X |
| Objective | Long working distance plan achromatic objective |
| Eyepiece tube | Tinocular, inclination of 30Deg |
| Vertical illumination Unit | 6V, 20W, Halogen lamp, adjustable brightness |
| Focus system | Stage adjustable, coaxial coarse / fine focus system with tension adjustable and up stop, minimum division of fine focus of 0.7 micro meter |
| Nose piece | Quadruple (frontward ball bearing inner locating) |
| Stage | three layer mechanical, size: 280mm X 270 mm, moving range 8"X8" |
| POLISHING MACHINE Type : 7001 - PM |
|
| SPECIMEN CUTTING MACHINE Type : 7001 - CM |
|